20:30:00
Print, cut, fold and glue!.
See how it moves!
______________________________________________________________________________
Some tips:
The best paper for printing is a card paper, in Mexico we use "Opaline" , is good using 125g but best 225g.
The model is designed to fit all the page, so try to print in a option like "fit to page", some printers may change the printing results affecting a little the size and tone of the color, but using a fit to page option in all of them will result in a good model.
For black and withe models, the best option is to print them in a laser printer, also we had a very good results using inkjet printer.
Once you have finished building your mask, you may like to protect it from the dust and the humidity, so it is always good to give it a touch of transparent spray or transparent lacquer.
You can print the model several times, if you make a mistake in one piece, just print another.
Have fun!
GrisCatrina
The Vacolaci paper automata by Arturo Palacios is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Varacolaci
8
Once the stories and movies were filled with vampires, I found one that was Russian origin, considered the most powerful and whose skills were to create lunar and solar eclipses, and to transported himself astrally. This paper model Automata is inspired in one of them, in my own version, you can build one to chase your friends in the search for fresh blood!.
The Varacolaci ($8.00)
The Varacolaci comes in a PDF file with instructions and patterns. The difficulty level is medium, especially in the form of the face and head mechanism.
The size is 36 cms wide and 30 cms long, and once it dries, it moves with a single movement of your fingers.
Print, cut, fold and glue!, for the Varacolaci to fly on your hands, chasing your friends.
Print, cut, fold and glue!.
Some tips:
The best paper for printing is a card paper, in Mexico we use "Opaline" , is good using 125g but best 225g.
The model is designed to fit all the page, so try to print in a option like "fit to page", some printers may change the printing results affecting a little the size and tone of the color, but using a fit to page option in all of them will result in a good model.
For black and withe models, the best option is to print them in a laser printer, also we had a very good results using inkjet printer.
Once you have finished building your mask, you may like to protect it from the dust and the humidity, so it is always good to give it a touch of transparent spray or transparent lacquer.
You can print the model several times, if you make a mistake in one piece, just print another.
Have fun!
GrisCatrina
The Vacolaci paper automata by Arturo Palacios is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.